CS 32
applicazioni
Centrifugal, monoblock and single-impeller electrical pumps
with pump body, with connection to the motor by means of a
support unit. With flanged inlet and delivery openings (PN 10 )
and threaded counter-flanges.
These machines are ideal for pumping clean water and other
chemically and mechanically non-aggressive liquids. They are
adapt for civil, agricultural, industrial or general plant uses. Water
supply, spray or flowing irrigation, autoclave feed, high pressure
system, heating, conditioning and any other general service
requiring transfer of clean liquids.
limits of use
- Liquid temperature up to 35°C (for home use
according to EN 60335-2-41)
Temperature max. liquid: 90°C (for other uses)
- Ambient temperature up to 40°C
- Total suction lift up to 7 mt.
- Continuous duty
according to EN 60335-2-41)
Temperature max. liquid: 90°C (for other uses)
- Ambient temperature up to 40°C
- Total suction lift up to 7 mt.
- Continuous duty
engine
- Single-phase 230V-50Hz
- Three-phase 230/400V-50Hz P2 ≤ 7,5 kW
- Three-phase 400/690V-50Hz P2 > 7,5 kW
- Two-Pole induction motor (n = 2850 min-1)
- Insulation Class F
- Protection IP 55
- Minimum Efficiency Index (BEP) MEI ≥ 0,4
- Three-phase 230/400V-50Hz P2 ≤ 7,5 kW
- Three-phase 400/690V-50Hz P2 > 7,5 kW
- Two-Pole induction motor (n = 2850 min-1)
- Insulation Class F
- Protection IP 55
- Minimum Efficiency Index (BEP) MEI ≥ 0,4
materials
- Pump body: Cast Iron
- Support: Cast iron
- Impeller: Cast iron
- Shaft with rotor: Stainless steel AISI 304
- Mechanical seal: Ceramic/Graphite/NBR
- Support: Cast iron
- Impeller: Cast iron
- Shaft with rotor: Stainless steel AISI 304
- Mechanical seal: Ceramic/Graphite/NBR
| MODEL | PHASE | NOMINAL POWER | ABSORBED POWER | PERFORMANCES | MOUTHS | |||
|---|---|---|---|---|---|---|---|---|
| HP | kW | kW | Q (L/min) | H (m) | asp. | mand. | ||
| CSM 32-160 C | Single-phase | 2 | 1.5 | 2.7 | 450 | 25.5 | 50 | 32 |
| CSM 32-160 B | Single-phase | 3 | 2.2 | 3.3 | 500 | 28.8 | 50 | 32 |
| CSM 32-200 C | Single-phase | 5.5 | 4 | 5.7 | 600 | 40.7 | 50 | 32 |
| CS 32-160 C | Three-phase | 2 | 1.5 | 2.7 | 450 | 25.5 | 50 | 32 |
| CS 32-160 B | Three-phase | 3 | 2.2 | 3.3 | 500 | 28.8 | 50 | 32 |
| CS 32-160 A | Three-phase | 4 | 3 | 4.3 | 500 | 36.5 | 50 | 32 |
| CS 32-200 C | Three-phase | 5.5 | 4 | 5.7 | 600 | 40.7 | 50 | 32 |
| CS 32-200 B | Three-phase | 7.5 | 5.5 | 8.6 | 600 | 55.7 | 50 | 32 |
| CS 32-200 A | Three-phase | 10 | 7.5 | 9.5 | 600 | 60.7 | 50 | 32 |
| CS 32-250 C | Three-phase | 12.5 | 9.2 | 12 | 600 | 70 | 50 | 32 |
| CS 32-250 B | Three-phase | 15 | 11 | 13.5 | 600 | 81 | 50 | 32 |
| CS 32-250 A | Three-phase | 20 | 15 | 15.5 | 600 | 90.5 | 50 | 32 |
