CAM 100/130
applicazioni
Selfpriming jet water pumps with a very high hydraulic performance and a considerable pressure capacity. Able to pump up to mt. 8 depth and work perfectly even in soda-water. Suitable for water lifting and distribution in domestic fittings by small and medium sized tanks.
Disassembly Video
limits of use
- Liquid temperature up to 35°C (for home use according to EN 60335-2-41)
- Temperature max. liquid: 35°C (for other uses)
- Ambient temperature up to 40°C
- Total suction lift up to 8 mt.
- Continuous duty
- Temperature max. liquid: 35°C (for other uses)
- Ambient temperature up to 40°C
- Total suction lift up to 8 mt.
- Continuous duty
engine
- Single phase 230V-50Hz
- Three phase 230/400-50Hz
- Two-Pole induction motor (n = 2850 min-1)
- Insulation Class F
- Protection IP 44
- Three phase 230/400-50Hz
- Two-Pole induction motor (n = 2850 min-1)
- Insulation Class F
- Protection IP 44
materials
- Pump body: Cast Iron
- Motor Support (CAM 100-152-202-302) : Cast Iron
- Motor Support (CAM 130) : Aluminium
- Impeller (CAM 100-152-202-302) : Stainless Steel AISI 304
- Impeller (CAM 130) : Noryl
- Diffuser: Noryl
- Shaft with rotor: Stainless Steel AISI 304
- Mechanical seal: Ceramic/Graphite/NBR
- Motor Support (CAM 100-152-202-302) : Cast Iron
- Motor Support (CAM 130) : Aluminium
- Impeller (CAM 100-152-202-302) : Stainless Steel AISI 304
- Impeller (CAM 130) : Noryl
- Diffuser: Noryl
- Shaft with rotor: Stainless Steel AISI 304
- Mechanical seal: Ceramic/Graphite/NBR
| MODEL | PHASE | NOMINAL POWER | ABSORBED POWER | PERFORMANCES | MOUTHS | |||
|---|---|---|---|---|---|---|---|---|
| HP | kW | kW | Q (L/min) | H (m) | asp. | mand. | ||
| CAM 100 | Single-phase | 1 | 0.75 | 1.1 | 60 | 46 | 1" | 1" |
| CAM 130 | Single-phase | 1.3 | 1 | 1.3 | 60 | 47 | 1" | 1" |
| CA 100 | Three-phase | 1 | 0.75 | 1.1 | 60 | 46 | 1" | 1" |
| CA 130 | Three-phase | 1.3 | 1 | 1.3 | 60 | 47 | 1" | 1" |
