| MODEL | PHASE | NOMINAL POWER | POWER CONSUMPTION | PERFORMANCE | SHOUTS | |||
|---|---|---|---|---|---|---|---|---|
| HP | kW | kW | Q (L/min) | H (m) | asp. | mand. | ||
| KPM 50 BR | Single-phase | 0.5 | 0.37 | 0.55 | 35 | 38 | 1″ | 1″ |
| Applications | Residential Civil Home |
|---|---|
| Manuale | |
| Type of fluid | Clean water |
| Famiglia | KPM-BR |
KPM-BR
Volumetric water pump able to offer high pressions in relation to comparatively low powers and which have particularly steady operating curves.
Qualified in domestic fittings, to increase the system pressure in aqueducts and for automatic water distribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities.
Limits of use:
- Liquid temperature up to 35°C
(for home use according to EN 60335-2-41)
- Temperature max. liquid: 60°C (for other uses)
- Ambient temperature up to 40°C
- Total suction lift up to 7 mt.
- Continuous duty
- Liquid temperature up to 35°C
(for home use according to EN 60335-2-41)
- Temperature max. liquid: 60°C (for other uses)
- Ambient temperature up to 40°C
- Total suction lift up to 7 mt.
- Continuous duty
Engine:
- Single-phase 230V-50Hz
- Two-Pole induction motor (n = 2850 min-1)
- Insulation Class F
- Protection IP 44,sp_n_ins_prod=1
- Single-phase 230V-50Hz
- Two-Pole induction motor (n = 2850 min-1)
- Insulation Class F
- Protection IP 44,sp_n_ins_prod=1
Material:
- Pump body: Brass
- Motor Support: Cast Iron
- Impeller: Brass
- Shaft with rotor: Stainless Steel AISI 304
- Mechanical seal: Ceramic/Graphite/NBR
- Pump body: Brass
- Motor Support: Cast Iron
- Impeller: Brass
- Shaft with rotor: Stainless Steel AISI 304
- Mechanical seal: Ceramic/Graphite/NBR
